smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate U Series 5 family Device Model: ST340823A Serial Number: 7EF1HAC6 Firmware Version: 3.07 User Capacity: 40,020,664,320 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 4 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Jun 7 17:08:57 2006 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 422) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 44) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000e 069 058 025 Old_age Always - 149398669 3 Spin_Up_Time 0x0002 070 070 000 Old_age Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 58 5 Reallocated_Sector_Ct 0x0032 100 100 036 Old_age Always - 0 7 Seek_Error_Rate 0x000e 062 045 030 Old_age Always - 601507687012 9 Power_On_Hours 0x0032 100 094 000 Old_age Always - 220 10 Spin_Retry_Count 0x0012 100 100 097 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1257 194 Temperature_Celsius 0x0022 022 048 000 Old_age Always - 22 195 Hardware_ECC_Recovered 0x001a 067 052 000 Old_age Always - 89396450 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 185 000 Old_age Always - 45 200 Multi_Zone_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 35 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 35 occurred at disk power-on lifetime: 174 hours (7 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 41 4c 02 e0 Error: ICRC, ABRT at LBA = 0x00024c41 = 150593 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 41 4c 02 e0 00 00:00:25.622 READ DMA c8 00 01 41 4c 02 e0 00 00:00:24.898 READ DMA c8 00 01 00 00 00 e0 00 00:00:24.871 READ DMA e3 03 00 01 4f c2 a0 00 00:00:22.678 IDLE ef 03 42 01 4f c2 a0 00 00:00:22.667 SET FEATURES [Set transfer mode] Error 34 occurred at disk power-on lifetime: 174 hours (7 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 41 4c 02 e0 Error: ICRC, ABRT at LBA = 0x00024c41 = 150593 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 41 4c 02 e0 00 00:00:24.898 READ DMA c8 00 01 00 00 00 e0 00 00:00:24.871 READ DMA e3 03 00 01 4f c2 a0 00 00:00:22.678 IDLE ef 03 42 01 4f c2 a0 00 00:00:22.667 SET FEATURES [Set transfer mode] ef 03 0c 01 4f c2 a0 00 00:00:22.667 SET FEATURES [Set transfer mode] Error 33 occurred at disk power-on lifetime: 4989 hours (207 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 7e 72 22 e0 Error: ICRC, ABRT at LBA = 0x0022727e = 2257534 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 7e 72 22 e0 00 00:00:17.902 READ DMA c8 00 08 7e 72 22 e0 00 00:00:17.363 READ DMA 10 00 ff 00 00 00 e0 00 00:00:17.363 RECALIBRATE [OBS-4] c8 00 08 7e 72 22 e0 00 00:00:16.826 READ DMA c8 00 08 7e 72 22 e0 00 00:00:16.253 READ DMA Error 32 occurred at disk power-on lifetime: 4989 hours (207 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 7e 72 22 e0 Error: ICRC, ABRT at LBA = 0x0022727e = 2257534 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 7e 72 22 e0 00 00:00:17.363 READ DMA 10 00 ff 00 00 00 e0 00 00:00:17.363 RECALIBRATE [OBS-4] c8 00 08 7e 72 22 e0 00 00:00:16.826 READ DMA c8 00 08 7e 72 22 e0 00 00:00:16.253 READ DMA c8 00 08 0e df 15 e0 00 00:00:16.243 READ DMA Error 31 occurred at disk power-on lifetime: 4989 hours (207 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 7e 72 22 e0 Error: ICRC, ABRT at LBA = 0x0022727e = 2257534 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 7e 72 22 e0 00 00:00:16.826 READ DMA c8 00 08 7e 72 22 e0 00 00:00:16.253 READ DMA c8 00 08 0e df 15 e0 00 00:00:16.243 READ DMA ca 00 08 5e 1f 14 e0 00 00:00:16.243 WRITE DMA c8 00 08 16 da 13 e0 00 00:00:16.230 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 30 - # 2 Short offline Completed without error 00% 5394 - # 3 Short offline Completed without error 00% 4988 - # 4 Extended offline Aborted by host 90% 4862 - # 5 Short offline Completed without error 00% 4841 - # 6 Short offline Completed without error 00% 1785 - # 7 Short captive Completed without error 00% 0 - Device does not support Selective Self Tests/Logging